- Posts: 146
Proof of Pudding Part I
- Paul
- Topic Author
- Offline
Less
More
7 months 3 days ago - 7 months 3 days ago #1710
by Paul
Proof of Pudding Part I was created by Paul
This refers to putting the advice in the Article "The New Piston/Gudgeon Pin Problem" to the test, Part I being the manufacture and fitting of the aluminium alloy blind bushes.
Chosen material was 6086-T6 bar of 3/4" diameter, readily available on ebay. Its properties are adequate, and it is easy to machine.
Pudding-Proof Part II will follow in due course, I hope, after the model has done a significant amount of road work, with no problems.
Watch this space.....
Chosen material was 6086-T6 bar of 3/4" diameter, readily available on ebay. Its properties are adequate, and it is easy to machine.
Pudding-Proof Part II will follow in due course, I hope, after the model has done a significant amount of road work, with no problems.
Watch this space.....
Last edit: 7 months 3 days ago by Paul.
Please Log in or Create an account to join the conversation.