ABC to Bonneville

Peter,
I am happy to look out for some Sensprays on ebay and send you the link for you to bid. Before spending out, it would be worth asking if anybody on the forum has experience of using 2 small carbs close to the heads and if that gave more 'umph' than one larger carb on the end of that rather long inlet manifold. You can see the 'Gnome Rhone-ABC Barthélémy 1922 500cc OHV' on the web with a 2 carb setup - it looks quick; however!
best wishes Ian

Bonjour Peter
Super projet qui vas nous faire réver un peu. Tu fabrique tes pièces, tes pistons etc il te manque encore le N° 35 et Burt revivra de nouveau.
Bon courage
Amicalement
Daniel DAVID

Hello Peter
Great project that will make us dream a little. You make your parts, your pistons etc you still miss the # 35 and Burt will live again.
Good luck
Kindly
Daniel DAVID

hi peter what are the valve timing degrees

Hi Keith
This Camshaft is 280 degrees and nearly 6mm lift ( 5.9mm) I should be fitting it in the next few days and then I will put the degree plate on it and follow the lift profile.Because of the follower arrangement I will also be plotting the Left and Right Cylinders. When that is done I will send it to you. We are going to be cutting a few more with different profiles and duration. We are hoping to try all of them.
Regards
Peter