Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1
  • 2

TOPIC: Kick starter information required for 1920ABC

Kick starter information required for 1920ABC 2 months 2 weeks ago #917

  • ian
  • ian's Avatar
  • Offline
  • Posts: 11
Hello all
I have to make all the kick start parts as i have nothing
I have a copy of Les 's article from the vmcc mag
do any of you know how to make the geared quadrant?
Would a brass casting be ok for the kick start lever
How can you tell if the spring in the gear box is strong enough before you assemble it all
Any observations or comments would be greatly appreciated
The administrator has disabled public write access.

Kick starter information required for 1920ABC 2 months 2 weeks ago #918

  • Cliffy
  • Cliffy's Avatar
  • Offline
  • Posts: 11
Hi I have a spare casting I had done for my ABC in maliable steel if you need one.
The administrator has disabled public write access.

Kick starter information required for 1920ABC 2 months 2 weeks ago #919

  • Jasdane
  • Jasdane's Avatar
  • Offline
  • Posts: 38
  • Thank you received: 3
Hi Ian and Cliffy
Have you thought about making more than one kick start mechanism ?
I presume this is the UK type kick start ?
As I would like one if you did make another.
Also if Ian does not want the casting can I have it ?

Kind regards Andrew
The administrator has disabled public write access.

Kick starter information required for 1920ABC 2 months 2 weeks ago #920

  • ian
  • ian's Avatar
  • Offline
  • Posts: 11
Hello Cliffy
Yes i would be very interested in the lever
How should i contact you- do you have an E mail address
The administrator has disabled public write access.

Kick starter information required for 1920ABC 2 months 2 weeks ago #921

  • ian
  • ian's Avatar
  • Offline
  • Posts: 11
Hello Andrew
I'm a long way from making any promise about supplying any thing.
If its appropriate i will keep you in mind
The administrator has disabled public write access.

Kick starter information required for 1920ABC 2 months 2 weeks ago #922

  • Cliffy
  • Cliffy's Avatar
  • Offline
  • Posts: 11
Hi email is This email address is being protected from spambots. You need JavaScript enabled to view it.. Cheers Chris.
The administrator has disabled public write access.

Kick starter information required for 1920ABC 1 month 3 weeks ago #930

  • ian
  • ian's Avatar
  • Offline
  • Posts: 11
Hello Andrew
I have been very lucky and managed to obtain the quadrent assembly together with
the cross member that it pivots in.So thank goodness i wont have to get those parts made.
So I'M sorry i cant help you with any parts
best of luck
Ian
The administrator has disabled public write access.

Kick starter information required for 1920ABC 1 month 3 weeks ago #933

  • Jasdane
  • Jasdane's Avatar
  • Offline
  • Posts: 38
  • Thank you received: 3
Hi Ian
Any chance of some pictures, or dimensioned sketches, or a bigger ask, would you get some quadrant castings made for other members ?
Andrew
The administrator has disabled public write access.

Kick starter information required for 1920ABC 1 month 3 weeks ago #934

  • keithsams
  • keithsams's Avatar
  • Offline
  • Posts: 112
  • Thank you received: 8
if you go into newsletters 1001 you will find a very good drawing paul incuded
sorry there are no dimensions but the rest is good
The administrator has disabled public write access.

Kick starter information required for 1920ABC 1 month 3 weeks ago #935

  • Paul
  • Paul's Avatar
  • Offline
  • Posts: 48
  • Thank you received: 2
A footnote - the Newsletter was from me, but the extremely rare Instructions for Fitting a Kick-starter was generously contributed by Richard Johnson.
The administrator has disabled public write access.
  • Page:
  • 1
  • 2