- Posts: 11
Main stand spring
- ian
- Offline
Less
More
4 years 9 months ago #629
by ian
Replied by ian on topic Main stand spring
Hello Peter
That would be a great help if you already have some spare springs.
With Wolfangs sketches a working stand would be with in reach!
Ian
That would be a great help if you already have some spare springs.
With Wolfangs sketches a working stand would be with in reach!
Ian
Please Log in or Create an account to join the conversation.
- Wolfgang
- Offline
Less
More
- Posts: 18
4 years 9 months ago #631
by Wolfgang
Replied by Wolfgang on topic Main stand spring
Hello,
here are the measurements of my pen, it works well.
Note that the rod has to be much thinner than the inner diameter of the spring, because it gets smaller and blocks otherwise.
The outside diameter must not be bigger otherwise it does not fit into the tube of the stand.
Greeting
Wolfgang
here are the measurements of my pen, it works well.
Note that the rod has to be much thinner than the inner diameter of the spring, because it gets smaller and blocks otherwise.
The outside diameter must not be bigger otherwise it does not fit into the tube of the stand.
Greeting
Wolfgang
Please Log in or Create an account to join the conversation.
- Alan
- Topic Author
- Offline
Less
More
- Posts: 25
4 years 9 months ago #632
by Alan
Replied by Alan on topic Main stand spring
Dear Wolfgang.
Excellent working sketch!
Many thanks yet again for taking the trouble to respond so quickly.
Kind regards,
Alan
Excellent working sketch!
Many thanks yet again for taking the trouble to respond so quickly.
Kind regards,
Alan
Please Log in or Create an account to join the conversation.
- keithsams
- Offline
Less
More
- Posts: 206
4 years 9 months ago #633
by keithsams
Replied by keithsams on topic Main stand spring
hi
I have several rods and tubes all ex stock, I believe ex Jarvis ex david hales
no good springs
I will be at Banbury on sunday otherwise please get in touch
I have several rods and tubes all ex stock, I believe ex Jarvis ex david hales
no good springs
I will be at Banbury on sunday otherwise please get in touch
Please Log in or Create an account to join the conversation.
- Alan
- Topic Author
- Offline
Less
More
- Posts: 25
4 years 9 months ago #634
by Alan
Replied by Alan on topic Main stand spring
Keith,
Thanks- I seem to have located everything except the spring itself, which Peter is offering to supply in September.
So I’ll leave these to those in greater need.
Regards,
Alan
Thanks- I seem to have located everything except the spring itself, which Peter is offering to supply in September.
So I’ll leave these to those in greater need.
Regards,
Alan
Please Log in or Create an account to join the conversation.
- ian
- Offline
Less
More
- Posts: 11
4 years 9 months ago #645
by ian
Replied by ian on topic Main stand spring
Hello Wulfgang
I do not have an original stand.
Is the internal dia of the tube 18.7mm
so both end pieces will fit into them?
What is the wall thickness so i can
make mine strong enough!
What does the small spring and ball bearing do?
It must act as some kind of locator
hope you can help
best wishes
Ian
I do not have an original stand.
Is the internal dia of the tube 18.7mm
so both end pieces will fit into them?
What is the wall thickness so i can
make mine strong enough!
What does the small spring and ball bearing do?
It must act as some kind of locator
hope you can help
best wishes
Ian
Please Log in or Create an account to join the conversation.